Luponds
1200mm wide MULTI COLOUR LED Light Bar & Spillway Blade Water Feature
- SKU:
- WF-SWLED1200COMBO-MULTI
- Shipping:
- Calculated at Checkout
COMBO DEAL
Frequently bought together:
Description
This bundled package comprising of a high quality stainless steel waterwall spillway and MULTI-COLOURS LED light bar allows you to create a projecting effect water feature and with lighting, ensures your water feature comes to life at night!
Features
1 x LED Light Bar
- Material: High strength 316 stainless steel backing bar, LED Strip, Clear Resin filler
- Finish: Stainless steel - linished back, Clear LED face
- Dimensions: 1200mm Long x 20mm Wide x 10mm High
- Power Input: 230-240V, 50Hz
- Power Output: 12V
- Lighting: 8 Colour variation LED with RGB Remote Controller included(require 1 x A27 battery size)
- Cable Length: 5 metres
- Install Location: Typically to top of Luponds Spillways
- General LED light Bar Install Guide Included
- Warranty: 1 year limited Manufacturer Warranty Note: Cutting cables will void warranty.
1 x Water Feature Spillway Blade:
- Size: 1200mm Long x 80mm Wide x 80mm High
- Lip: 35mm
- Material: 316 stainless steel
- Inlet Size: 2 x 25mm Female Treaded
- Inlet Entry: Bottom
- Warranty: 1 year Limited Manufacturer warranty
- General Install Guide Included
- Note - Always read Instruction Manual thoroughly before installation
Types of Spillway Effects
- Cascade/Wall Wash - This is achieved where water flows softly from the spillway and cascades down the wall face into a pond or reservoir. A minimum flow rate of 50-60 Litres per minute (l/min) at the height of the spillway per metre of spillway length.
- Projecting Curtain Sheet – This is achieved where a large volume of water passes through the spillway, producing a solid sheet of water that projects away from the wall. A minimum flow rate of 230 litres per minute (l/min) at the height of the spillway per metre of spillway length and the spillway installed no higher than 900mm from water level. Note - the further the water drops, the narrower the water sheet widths become due to surface tension. It’ll project between 80mm-200mm away from the lip – the final result depends on external factors, e.g. plumping, location and pump capacity.
See also 'DIY Water Feature Kits' and 'DIY Lighting Kits' Category for Packages to suit.